克鲁勃-专业润滑产品及服务

Klubersynth GH 6-1000

Klubersynth GH 6-1000

Klubersynth GH 6-1000 Product description Klübersynth GH 6 oils are gear oils on a polyglycol basis. They have a high scuffing l...

    KLUBER - Klubersynth GH 6-1000 详情


    Klubersynth GH 6-1000

      Product description

      Klübersynth GH 6 oils are gear oils on a polyglycol basis. They have a high scuffing load capacity and micro-pitting resistance. These oils have also proved their good wear protection in rolling bearings on the FAG FE8 test rig for gear oils. Klübersynth GH 6 oils stand out for their excellent ageing and oxidation resistance, good viscosity-temperature behaviour and very good thermal stability.


      Benefits for your application

      • The oils meet the requirements according to DIN 51517-3, CLP. Corresponding gears
        can be switched to Klübersynth GH 6 oils without prior consultation provided the general application notes are observed.

      • KlüberComp Lube Technology involves the selection of high-quality raw materials and individual consultation and services by Klüber Lubrication, ensuring high-performance lubrication of different gearbox components.

      • As of ISO VG 220 the scuffing load stage API GL-5 is achieved. Gears are sufficiently
        protected against scuffing even under high peak loads.

      • The oils' high micropitting resistance acc. to FVA 54 GFT ≥ 10 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.

      • Good wear protection prevents premature rolling bearing failure.

      • Much longer service life than mineral oils due to the excellent ageing and oxidation resistance of the base oil; thus maintenance intervals can be extended and in certain cases even lifetime lubrication is possible.

      • Owing to the wide service temperature range a single viscosity grade can cover both low and high temperatures in many applications.

      • The optimum friction behaviour of the polyglycol base oil reduces power losses and improves efficiency.

      • The excellent viscosity-temperature behaviour supports the formation of a sufficient lubricating film even at elevated and high temperatures.

      • Seals made of 72 NBR 902 (except ISO VG 22), 75 FKM 585 and 75 FKM 170055 are resistant to Klübersynth GH 6 oils. Leakage and contamination are prevented.

      • Approved by Siemens (Flender), Siemens Geared Motoros, SEW Eurodrive, Getriebebau Nord, Stöber Antriebstechnik, Lenze, ZAE Antriebssysteme, Bonfiglioli, Rossi Motoriduttori, Motovario, Moventas, Boston Gear, Baldor and many more.


    Klubersynth GH 6-1000

    上一个:Klubersynth BZ 44-4000
    下一个:Klubersynth EG 4- 150

Downloads

Klubersynth GH 6-1000_PDS.PDF
产品说明书
Klubersynth GH 6-1000_MSDS.PDF
MSDS安全报告
Klubersynth GH 6-1000_FG.PDF
食品级认证证书
Klubersynth GH 6-1000相关资料请向网站客服人员索取!

联系方式

德国克鲁勃润滑油

深圳佐宇实业有限公司

地址:深圳市宝安区沙井街道上寮五区81号丰盛大厦

电话:0755-29752212

传真:0755-29752212

24小时:0755-29752212